ONE 50ml TUBE LOCTITE 567 THREAD SEALANTMASTER PIPE SEALANT WITH PTFEHI-TEMP. FORMULATIONLoctite 567 is a high technology anaerobic sealant suitable for all metal pipe threads and fittings. Taper threaded fittings seal instantly at low pressures (<100kPa). Parrallel threads or loose and damaged threads require full cure before applying pressure. Threads sealing flammable gases or fluids should be clean, accurately cut, and correctly tightened for maximum sealing and safety. Locks and seals against leakage and corrosion. Approved for use with Natural Gas and Town Gas, and rated to a pressure of 1050kPa. Seals liquid hydrocarbons, halogenated hydrocarbons, alcohols, organic acids, mild mineral acids and alkalis (diluted and cold).DIRECTIONS:1. For best results clean parts removing heavy oils, grease and cutting fluids.2. Apply a band of Loctite 567 Sealant to male threads. Loose, damaged threads, or large pipe threads (>25mm) may require more sealant.3. Tighten to correct torque for pipe size. 4. The use of Loctite 7649 Primer is recommended in temperatures below 10°C where large gaps are present, or where fast cure is required.5. For more information refer to Technical Data Sheet. (Part No. L0C56747)